FIN: Feed, label advance and sensor calibration

When you change a roll or print a single label, the position of the label web matters. This video shows three operations on the FIN label printer.

F (FEED) to load a new roll

Guide the leading edge of the new roll into the feed path. Press F so the printer can grip the web and feed it forward.

Button 1 to reach a small label

After printing a small label, press 1 to move the web forward by about 300 mm. Peel the label off, then press 1 again to return the web to the next print position.

1 + F + M to calibrate the sensor

Press all three buttons together. The optical sensor detects the difference between the light passing through a label and the stronger light in the gap. Calibration lets FIN identify the label edge.

See the FIN label printer and ordering details