CNC 3030S: technical specifications and configuration, CNC 3030S,technical specifications,vacuum table,vibration knife

CNC 3030S: technical specifications and configuration

Technical sheet CNC vibration knife 3030S

The original PDF supplier contains basic parameters, a list of equipment, mechanical and electrical configurations and machine software functions. The document is in English.

  • Effective cutting range 3000 × 3000 mm; walk Z 60 mm.
  • Speed up to 1200 mm/s depending on the material; positioning 0,1 mm/300 mm.
  • Aluminium satatine vacuum table, two fans of 7,5 kW and a four-level material carrier.
  • Servo drives Inovance, REALTOP and ET nesting controller.
  • Machine approximately 3800 × 3800 × 1550 mm, gross mass approximately 2200 kg and rated power 20 kW.

Pre-delivery validation data

Power supply is listed in PDF as 380 V / 60 Hz. Implementation for the local network 400 V / 50 Hz be certified before delivery. Information to 20.000 head cycles have no time base. Hod Z does not specify cutting thickness. Load capacity and roll diameter, exact set of import formats and delivery conditions are specified in the offer.

Below are related items and additional video documentation. The title image is illustrious visualization and the technical specifications are derived from the attached original.

Odpri priponko Poglejte si povezavo
Published:
21.11.2026

Related products

Additional documentation

Related FAQs