Do I get a CAD model and robot program with a LiDAR scan?

Capture is not an automatic robotic program

No. CAD model, simulation and programming are not automatically included in the spatial coverage order. Before we perform, we determine what data and tasks you need. Point cloud is the spatial reference of the areas covered; further preparation of models should be defined separately. [1]

Example: To compare the two positions of the new table, you may need a different result than to produce its exact compatible carrier. In addition to space, robot, tool, product and process data are needed to plan the operation of the robot.

How to order the right result

We suggest that you indicate the target programme, the contractor of the follow-up and the decision you wish to take. The agreement should show whether it is capture, treated cloud of points, simplified geometry, editing model or wider project.

The scan does not constitute confirmation of the safety of the cell or of the achieved production cycle. These verifications shall be part of a further expert examination.

[1] Autodesk: Point Clouds. https://www.autodesk.com/solutions/point-clouds