What do I need to build a CNC 3030S knife?
What do I need to build a CNC 3030S knife?
The machine itself measures approximately 3800 × 3800 × 1550 mm and the gross mass is approximately 2200 kg. In addition, you need space for the last material carrier, roll, management, service access and manipulation of cut pieces. Check the door, transport route, unloading method and ground load capacity before delivery.
PDF lists rated power 20 kW and power 380 V / 60 Hz. For use on the Slovenian network, the corresponding performance for 400 V / 50 Hz for the entire machine, fan and steering equipment must be confirmed before delivery. Compatibility is not assumed simply because it is a three-phase connection. The electrical preparation shall be determined by the qualified operator on the basis of the final documentation.
Walk Z 60 mm is not an indication of maximum cutting thickness. Nor is the allowed wheel diameter and load capacity specified in PDF. These data, delivery time and assembly are defined in a concrete offer.
Published:
Related products
Additional documentation
-
Look
CNC 3030S: technical specifications and configuration
-
Look
CNC Vibration Knife: demonstration of material cutting
-
Look
CNC knife: arrangement and cutting of several cuts