Svet Črnil

Description

Pneumatic fast connection INOX 3/8 for hose 12 mm

When selecting the connection, check the connection thread and the outer diameter of the pipe. Pneumatic fast connection male thread 3/8 to tube 12mm INOX connects male thread of nominal size 3/8 inch with tube outside diameter 12 mm. The price is EUR 3 with VAT. Check the thread standard and the working conditions of the concrete execution before ordering.

Three euros to go. How much does wrong choice cost when the link needs to be dismantled and the order repeated? Here we start with two data: male thread of nominal size 3/8 inches and pneumatic tube with an external diameter of 12 mm. Only then should the thread and conditions of use be checked. So we look for savings where it makes sense!

Pneumatic fast connection male thread 3/8 to tube 12mm INOX is a flat stainless steel coupling. The price is EUR 3 with VATand the type of offer is goods. In the company Svet Črnil we present a concrete connection between the threaded connection and the tube 12 mm, where we check the matching of both sides before purchasing.

Male thread 3/8 and outer diameter 12 mm

The markings describe the different sides of the same piece. The male thread is an external thread that needs an appropriate internal thread at the opposite part. 12 mm refers to external diameter of pneumatic tube. The tube is not selected by internal diameter or approximate similarity to the old line.

The threading mark 3/8 of the thumb is not directly converted into the outer diameter of the thread in millimetres. It's a nominal size. We do not see whether the thread is G, R or NPT. With this product, the exact thread type is not confirmed, so we have to check the standard and the actual dimensions before purchasing. A similar appearance and initial twisting do not yet prove fit.

Thread and tube selection table

When choosing, we check both sides. Matching only threads or just pipes is not enough.

Send us markings, measurements and a photo of the connecting point. Let us check the standard and the actual dimensions, including the step and shape of the thread. Only measuring the diameter with a sliding scale is not enough.

Straight construction and stainless steel INOX

The flat design is useful in designing the connection, where we want to lead the tube to the axis of the connecting city. If both sides match properly, a direct connection can eliminate the need for an additional transition between the dimensions. This means fewer procurement and inspection components. We judge such an advantage according to the actual layout, not just a photograph of the product.

Confirmed material is stainless steel INOX. His class is not confirmed, so we do not label the product as a certain quality of steel and do not attribute it to resistance to concrete chemicals. The material of all seals remains unconfirmed. In addition to the metal part, we check the gaskets, hose, environment and cleaning.

The outer diameter of 12 mm does not specify internal section or flow. The design includes the internal diameter and length of pipes, valves and the consumption of the connected device.

Use and installation checks

Before installation we require information that is not contained in the product name. Working pressure, temperature range, permissible media, torque and certificates are not confirmed. Also, the pneumatic description does not replace the technical limitations for concrete use. In a more demanding process, we first clarify the conditions, then select the component.

• Let's check the thread standard and the prescribed method of sealing. We don't choose the sealant by heart.
• Confirm the compatibility of the 12 mm outer diameter tube and the required preparation of its end.
• We provide space for assembly, inspection and disconnection without unnecessary pressure on the pipes.
• Before the operation, we safely stop the device, separate the inlet and relieve the system by the procedure of the device.
• After installation, we check the tightness and operation after the approved procedure and record the result.

In maintenance, we monitor tube damage, joint movement and leakage. The cause is investigated; further winding without instructions is not a reliable solution.

HACCP and cleaning in food production

In food we think beyond the material of one piece. HACCP is considered a requirement for hazard management planning, implementation of procedures and production documentation. Mount due to INOX is not automatically HACCP certified. Its suitability should be assessed by the place of incorporation and the risk of food.

We anticipate access to the coupling, the possibility of screening and the prevention of residue retention around the coupling. Let's see if it's possible to clear the area behind the hose and at the thread. For the selected cleaner we need data on the compatibility of metal, all seals and pipes, taking into account concentration, contact time and temperature. We don't recommend any special cleaners.

European Commission on the Food hygiene represents a common hygiene framework in the food chain. From this we derive a practical question for the choice of equipment: will we be able to examine, clean and document the installation site? The answer requires the assessment of a specific device.

Contact with food and supporting documents for the whole set

For direct contact with food we require evidence for a concrete complete assembly, including coupling, all gaskets and hose. The name of stainless steel alone is not sufficient evidence. Let us clarify the nature of the food, the conditions of contact and the intended use and ask for appropriate documentation for these conditions.

European Commission in Review Materials in contact with food explains the importance of the safety of materials coming into contact with food. This expert basis does not confirm our product for such use. Without proper evidence, we do not represent it as an approved food connection.

Separate the feed to drive the mechanism from the use in which the medium reaches the food. In the record we determine the function of water, the installation site and the basis for the selection.

GMP, pharmacy and traceability of connection

In the case of pharmaceutical production of GMP, requirements for good manufacturing practice, planning, control and documentation of processes. Mount not automatically GMP or USP certified. We do not guarantee sterility or consistency for the pharmaceutical process for this product.

When assessing, we check the accessibility of the link, the defined cleaning process, the required material evidence and the replacement record. For traceability, the identification of the supplier, the component label and the batch where available, the installation site and the date of the intervention shall be retained. If the procedure requires information that is not available, we do not assume relevance.

European Commission collection EudraLex Volume 4 contains GMP guidelines for medicinal products. It is the starting point for process requirements, not the certificate of this connection.

Favourable: comparison of offers and savings

For EUR 3 with VAT, we get a clearly stated combination of the INOX performance level, the 3/8 male thread and the 12 mm outer diameter connector. When comparing the competing product, we check the same items. The table below is a tool for comparison, not an assessment of an unverified competitor.

Our goal is to buy a good job and do it cheaper: with the right amount and thought-out installation. The savings are estimated together with labour costs and additional pieces. Without competitive prices, we do not claim to be the cheapest.

Ljubljana: local demand for INOX connection

Looking for a local solution and Ljubljana is your starting point? At the company Svet Črnil send us the quantity, marking the connection points, pipe data and requirements for medium, pressure, temperature and cleaning. Please indicate in particular the necessary supporting documents. Availability, supply and open technical questions are checked before the order is confirmed.

Check the combination 3/8 and 12 mm and submit a request! The price of the product is EUR 3 with VAT; the suitability for your system should be based on validated data.

Is it responsible to demand a more expensive compressor if we have not yet verified that we are losing money through wrong-chosen and non-tight connections?

Illustrational display of the series. The appearance of the concrete delivered version may vary; do not specify the dimensions, steel type or certificates from the image.